FP37

■ Unterstützt interne Standard-USB 3.0-Anschlüsse (19pin)

■ Passt in jeden 3.5’’ Einschub

■ Voll Unterstützung des SDXC Kartenformats

■ Zusätzliche Anschlüsse für SuperSpeed USB 3.0

■ Unterstützt USB 3.0 für maximale Übertragungsgeschwindigkeit

Hinweis

CF card needs to be installed upside down.

 

Spezifikationen

Modell Nr. SST-FP37
Gehäusematerial SECC
Farbe Schwarz , Silber
Frontanschlüsse 1 x USB 3.0 port
Anschluss USB 3.0 (5Gbps)
Media card power requirement USB powered
Media Card Unterstützung SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF
Unterstützte Betriebssysteme Windows XP, Vista, Mac OS 9.x / X, Windows 7 / Win8
Abmessungen 101.6mm (W) x 25.5mm (H) x 136mm (D)
Gewicht 0.3kg

 




  • Downloads
  • Empfehlungen
  • Testberichte
  • F & A


Describe Ver Größe Download
FP37 firmware
       Note:Improve system compatibility
0579 293 KB
FP37 High resolution photos 911 KB
FP37 eDM (DE-FP37.jpg)   190 KB

FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. mehr...
PS07 Redefining the value Micro-ATX chassis mehr...
There are two versions of FP37, please check your serial number below and download the appropriate firmware.
Note: if incorrect firmware is used, the FP37 will still function properly but it might affect the LED light’s function.

V1.2
AL11430001~AL11431163
AL12010001~AL12011003
AL12060001~AL12061003
Download firmware FW0561 and install by executing the unzipped file.Download

V1.3
AL12130001~AL12131003
AL12180001~AL12181003
AL12190001~AL12191003
Download firmware DP04 and install by executing the unzipped file.Download
Please make sure all cables have been connected firmly and correctly. Also go to “Device Manager” if a yellow question mark appears like the below diagram, it means your motherboard’s driver is not up-to-date, please download the latest driver from your motherboard’s manufacturer website to solve this problem.

Route:
Start → Control Panel → Device Manager→ Under View select Device by connection → PCI bus
Under PCI bus, there will by multiple PCI standard PCI to PCI bridge devices.
Click open the available options until the device appears like the attached diagram