■ 표준 USB 3.0 내부 커넥터 제공 (19pin)

■ 3.5” 외장 드라이브 베이 지원

■ SDXC 카드 완벽 지원

■ SuperSpeed USB 3.0포트 지원

■ 5Gbits USB 3.0 인터페이스 지원


CF card needs to be installed upside down.



모델 번호 SST-FP37
Enclosure mterial SECC
블랙과 고급 실버 전면 패널
전면 I/O 포트들 1 x USB 3.0 port
인터페이스 USB 3.0 (5Gbps)
미디어 카드 전원 요구 사항 USB 전원
미디어 카드 지원 SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF
운영 체제 지원 Windows XP, Vista, Mac OS 9.x / X, Windows 7 / Win8
치수 101.6mm (W) x 25.5mm (H) x 136mm (D)
무게 0.3kg


  • 다운로드
  • 권장사항
  • 제품 리뷰
  • Q&A

설명 Ver 크기 다운로드
FP37 firmware
       Note:Improve system compatibility
0579 293 KB
FP37 High resolution photos 911 KB
FP37 eDM (KR-FP37.jpg)   169 KB

FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. 추가 정보...
PS07 Redefining the value Micro-ATX chassis 추가 정보...
There are two versions of FP37, please check your serial number below and download the appropriate firmware.
Note: if incorrect firmware is used, the FP37 will still function properly but it might affect the LED light’s function.

Download firmware FW0561 and install by executing the unzipped file.Download

Download firmware DP04 and install by executing the unzipped file.Download
Please make sure all cables have been connected firmly and correctly. Also go to “Device Manager” if a yellow question mark appears like the below diagram, it means your motherboard’s driver is not up-to-date, please download the latest driver from your motherboard’s manufacturer website to solve this problem.

Start → Control Panel → Device Manager→ Under View select Device by connection → PCI bus
Under PCI bus, there will by multiple PCI standard PCI to PCI bridge devices.
Click open the available options until the device appears like the attached diagram