FP35
￭ Fits in any 3.5” external drive bay
￭ Full support for SDHC card
￭ Additional USB, Firewire, eSATA, HD audio (Azalia) ports
￭ Supports USB 2.0 (480Mbits) for maximum data transfer
￭ +12V/+5V DC pass through output for 3.5” external storage without AC adapter*
비고
* The power cable is included in the box and support with +12V 6.4mm type, mini 6Din and min 4Din type.
사양
| 모델 번호 | SST-FP35B |
| Enclosure mterial | SECC |
| 색 | Black with extra silver front panel |
| 치수(핸들 바만) | 101.6mm (W) x 25.4mm (H) x 140mm (D) |
| 전면 I/O 포트들 | 1 x USB, 1 x 1394, 1 x audio (Azalia),1 x eSATA, 1 x MIC (Azalia) ,1 x +12V/+5V pass through output |
| 인터페이스 | USB 2.0 (480Mbps) |
| 미디어 카드 전원 요구 사항 | USB powered |
| 미디어 카드 지원 | XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*) |
| 운영 체제 지원 | Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7 |
| 무게 | 390 g |
| 비고 : |
| *Windows 98/me requires driver installation(downloadable from download section) |
|
PICTURES
- 다운로드
- 권장사항
- 제품 리뷰
- Q&A
| 설명 | Ver | 크기 | 다운로드 |
 FP35 Manual |
v1.0 | 2,111 KB |  |
| Driver for Windows 98/me |
v1.0 | 2,625 KB | |
| FP35 High resolution photos |
332 KB | |
|
|
FP35 eDM (KR-FP35B-100dpi.jpg)
|
349 KB |
|
|
|
이 제품에 대한 권장 항목이 없습니다. |
1. How can I prevent my system from crashing or freezing when I try to hot-swap my hard drive?
Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
- This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
- This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
2. Why can I not see the USB device icon in the system tray after I safely remove my media cards?
- When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.
- Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.
3. Why can I not see the USB device icon in the system tray after I safely remove my media cards?
- When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.
- Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.