관리 제품 섀시 Lascala Series LC17
   
 
외부 그림
 
 
 
 
소개
거실과 친근한 개인적 환경에 적합 하도록 디자인된 LC17은, 심플한 외관과 저소음 운영을 위한 훌륭한 기능성을 갖춘 케이스이다. 전면 틈과 구멍을 최소화 시켜 제작됨으로써 모든 것이 가려지거나, 숨겨져 최대한의 깨끗한 외관을 살리도록 했다. 깔끔하고 심플한 전면 패널과 걸맞은 내부는 HTPC케이스의 최신 디자인을 모두 적용하여 6개의 하드디스크가 장착 가능하고, CPU 냉각 공간을 최대로 확보하기 위해 파워 서플라이 마운트가 역방향으로 설계되는 등 최신의 기술을 모두 접목 하였다. 이제, 소비자가 필요한 부품을 케이스 때문에 수정해야 하는 일은 LC17에게 있어서는 존재하지 않을 것이다.

 
 
특별 기능
  • 환경에 완벽하게 융화 되도록 한 최적의 깔끔하고 절제된 스타일
  • 차세대 기술이 적용된 우수한 냉각 성능
  • 무소음 운영을 위한 뛰어난 기능성 확보
  • 풍부한 저장 장치 설치 공간
  • 랙마운트 장착가능 (가이드 옵션: RA-01)


특징 사진
 
 
모델 번호
SST-LC17B (블랙)
SST-LC17S (실버)
SST-LC17B-USB3.0 (블랙)
SST-LC17S-USB3.0 (실버)
재질
알루미늄 전면 패널, 0.8 mm SECC 몸체
메인보드
Standard ATX, Micro-ATX
멀티미디어
--
드라이브 베이
외부 5.25" x 2
3.5" x 1 (전면 I/O 포트자리)
내부 3.5" x 6
냉각 시스템
전면 2 x 92mm 또는 80mm 팬 슬롯
후면 2 x 80mm 배기팬, 2050rpm, 21dBA
측면 1 x 80mm 팬 슬롯
상단 --
하단 --
내부 --
확장 슬롯
7
전면 I/O 포트
USB 2.0 x 4 (SST-LC17B , SST-LC17S only)
USB 3.0 x 4 (SST-LC17B-USB3.0, SST-LC17S-USB3.0 only)
IEEE1394 x 1 (SST-LC17B, SST-LC17S only)
오디오 x 1
마이크 x 1
전원 공급장치
옵션 표준 PS2(ATX)
운영 체제 지원
--
확장 카드
9.5" (remove 1 of 2 HDD Cage if you want install up to About13"~14") , width restriction-5.51"
CPU 쿨러의 한계
135mm
PSU의 한계
Unlimited
순 중량
7.13kg
치수
425 mm (W) x 170 mm (H) x 425 mm (D), 30.7 liters
예비
--

권장 SilverStone 제품
FN81
Add FN81 for additional cooling in available 80mm fan slots 자세한 내용 보기...
SUSCOOL81
Equip your LC17 with Suscool 81 for the ultimate combination of quietness and performance. 자세한 내용 보기...
FP32-E
3.5" drive bay with 4 x USB 3.0 자세한 내용 보기...
FP35
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. 자세한 내용 보기...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 자세한 내용 보기...
CA01
Keep your case looking good with this cleaning cloth. 자세한 내용 보기...
설명
Ver
크기
다운로드
LC17 Manual
v1.0
5,765 KB
Installation Guide
v1.0
431 KB
Pin definition
v1.0
67 KB
Optional rackmount handles
Rackmount handles cannot support the entire weight of the chassis, rackmount tray or other support must be used in conjunction.


 

  • Q. Front panel connectors installation guide.
    A:

    Power switch and reset switch installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



    LED connector installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
    White colored wires are negative while other colored wires are positive.
    Power LED connector is designed as separate pins for compatibility with different motherboard specifications.


If the answers don't solve your problem, please email to support@silverstonetek.com. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.