La Strider ST1500 est aux limites de ce qu’une alimentation interne de PC peut fournir en termes de puissance en atteignant une sortie de 1500W (1600W en pic). Pour SilverStone, le but n’était pas seulement d’atteindre cette puissance maximale avec une alimentation grand-public mais bel et bien de créer un produit de rêve, c’est pour cela que tous les fonctionnalités intéressantes et connues y ont été ajoutées. La liste commence avec 8 rails +12v sans précédents chacun capable de fournir jusqu’à 25A et se prolonge avec des fonctions comme le câblage 100% modulaire, la très estimée certification 80 PLUS Silver, et un silence similaire aux alimentions de 500W. S’il y a une mise à jour faites pour durer, la ST1500 sera celle là.
Caractéristiques
Puissance de 1500W en continu et 1600W en pic
Câblage 100% modulaire avec sac de câbles
Rendement de 85%~88% entre 20% et100% de charge avec la certification 80 PLUS Silver
8 rails haut de gamme +12V fournissant 110A (Pic jusqu’à 120A)
Puissance de sortie continue de 1500W avec une température de fonctionnement de 40℃
Régulation de voltage stricte de ±3%
Ventilateur silencieux de 135mm avec 19dBA minimum
Condensateurs principaux japonais
4 connecteurs PCI-E 8pin, 8 connecteurs PCI-E 6pin, et 12 connecteurs SATA
Protection contre les surcharges
Protection contre les surtensions
Protection contre le survoltage
Protection contre le sous voltage
Protection contre les courts-circuits
Protection contre l’absence de charge
Q. My computer will trip the circuit breaker in my house, how do I prevent this?
A: If your computer is tripping the circuit breaker that means it is drawing too much power from one outlet. Please do the following:
Please make sure the computer is plugged directly into the wall outlet and do not use extension socket or other multiple outlet extension cords with the computer.
If the use of extension socket is necessary, avoid combined usage with other higher powered household appliances such as TV, audio amplifier, etc…
Contact your local electrician for information on how you can upgrade your house to accommodate higher electrical draw.
Q. ST1500 will turn on without any problems on a cold boot, but during warm boots (powering the system on again shortly after turning it off), it will trip the circuit breaker.
A: The power supply has a thermistor inside designed to limit inrush current. After the power supply starts up successfully, the thermistor will automatically lower its resistance to improve working efficiency. The amount of resistance is closely related to internal power supply temperature so once the power supply heats up, the resistance will decrease dramatically.
When the power supply is turned off, the thermistor will still detect high temperature and therefore provide less resistance to inrush current compared to cold boot. Since ST1500 has very higher capacity, its inrush current difference between cold and hot boot is much greater than most power supplies.
The only solution to this limitation is to consult a local electrician and install a new breaker with higher and suitable inrush current tolerance for the ST1500.