Home Prodotti CASE Lascala Series LC13-E
   
 
EXTERIOR PICTURES
  
 
 
 
Introduzione
Nel ridefinire lo stile di un genere ancora un avolta, l’LC13-E della SilverStone può essere considerato come una fascia impressionante sia bella che significativa. Dietro di essa si trova un chassis che offer un’ ampia gamma di configurazioni hard disk e di unità ottiche unite ad eccellenti caratteristiche di raffreddamento. Tra i case che sono stati costruiti senza scendere a compromessi, l’LC13 è la prima scelta per coloro che hanno bisogno di più libertà con il loro HTPC.

 
 
Caratteristiche speciali
  • Magnifico design del pannello frontale
  • Numerose possibilità di configurazione
  • Performance di raffreddamento di nuova generazione
  • Design del chassis altamente compatibile


FEATURE PHOTOS
  
 
Modello nr.
 SST-LC13B-E (nero)
SST-LC13S-E (silver)
SST-LC13B-E-USB3.0 (nero)
--
Materiale
 Pannelo frontale in alluminio, 0.8mm SECC body
Scheda madre
 ATX, Micro-ATX
Multimedia
 --
Alloggiamento
 Esterno 5.25" x 2
3.5" x 2
Interno 3.5" x 4
sistema di raffreddamento
 Frontale 1 x 92mm or 80mm fan slots
Posteriore 2 x 80mm exhaust, 2050rpm, 21dBA
Laterale 1 x 80mm fan slot & PSU vents
Superiore --
Inferiore --
Interno --
Slot d'espansione
 7
porte frontali d'entrata/uscita
 USB 2.0 x 2 (SST-LC13B-E, SST-LC13S-E only)
USB 3.0 x 2 (SST-LC13B-E-USB3.0 only)
IEEE1394 x 1
Audio x 1
MIC x 1
Alimentatore
 Optional standard PS2(ATX)
Sistemi operativi supportati
 --
Card grafiche
 Expansion card Support graphic cards up 14.2 inches (8.75 inches with optical drive installed), width restriction-5.51"
Limitation of CPU cooler
 135mm
Limitation of PSU
 Unlimited
Peso netto
 7.13kg
Dimensioni
 430mm (L) x 171.5mm (A) x 439.6mm (S), 32.4 liters
Extra
 --

Recommended SilverStone products
NT01-E
Equip your NT01-E for the ultimate combination of quietness and performance more information...
FN81
Add FN81 for additional cooling in available 80mm fan slots more information...
SUSCOOL81
Equip your LC13-E with Suscool 81 for the ultimate combination of quietness and performance. more information...
FP35
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more information...
FP53
Add FP53 to an available 5.25" drive bay for cooling a hot 3.5" hard drive. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
CP03
CP03 SATA II cable is perfect for any regular SATA devices. more information...
CP04
We recommend CP04 90° degree SATA cable for installing extension expansion card in LC13-E. more information...
Describe
Ver
Size
Download
LC13-E Manual
v1.0
4,527 KB


 
  • Q. Front panel connectors installation guide.
    A:

    Power switch and reset switch installation guide：
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



    LED connector installation guide：
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
    White colored wires are negative while other colored wires are positive.
    Power LED connector is designed as separate pins for compatibility with different motherboard specifications.
  • Q. USB 3.0 Cable Upgrade Guide
    A:

    1. Loosen four screws located on the back of LC13-E and detach top-panel gently.
         

    2. Loosen four screws on the center brace and detach it gently.
         
         

    3. Loosen four screws on the hard drive cage and detach it gently.
         

    4. Loosen two screws on the 5.25” device bracket and detach it gently.
         

    5. Loosen four screws on the FDD bracket and detach it gently.
         
         

    6. Loosen eight screws behind the front panel and detach front panel gently.
         

    7. Loosen two screws near front I/O module and detach it gently.
         

    8. Install USB 3.0 front I/O module (part number: G11303590) and secure with two screws.
         

    9. Secure wire with cable tie and assemble parts back in reverse order carefully.Your case is now USB3 ready.
         


If the answers don't solve your problem, please email to support.eu@silverstonetek.de. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.