HK
首頁 產品項目 附件 擴充槽裝置 FP35
   
 
外觀照片
  
 
 
 
產品介紹
銀欣FP35是ㄧ款整合全功能化讀卡機與支援USB/1394/eSATA/Audio接孔的3.5吋裝置，FP35支援全系列的SDHC多媒體儲存記憶卡，是對多媒體檔案有重度需求的使用者最佳的選配裝置。DC電源線的配置設計是銀欣對使用者的貼心設計，使用者不需要再攜帶笨重的AC電源轉換器，只需透過FP35的電源線就可以供應外揭示儲存裝置的用電。

 
 
特色
  • 支援任何3.5吋外露裝置槽
  • 支援全系列SDHC卡
  • 附加USB, Firewire, eSATA, HD audio (Azalia) 插槽
  • 支援USB 2.0 (480Mbits) 最大傳輸速率
  • +12V/+5V DC電源線可支援無AC電源的3.5吋外接儲存裝置


特色照片
  
 
REMARK

* 電源線內附於包裝內，可支援+12V 6.4mm 規格, 迷你 6Din 與 迷你 4Din 規格。
  
 
型號
 SST-FP35B
外殼材質
 SECC
顏色
 黑色, 附銀色面板
作業系統支援
 Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
尺寸(手把)
 101.6mm (寬) x 25.4mm (高) x 140mm (深)
前置 I/O
 1 x USB, 1 x 1394, 1 x audio (Azalia),1 x eSATA, 1 x MIC (Azalia) ,1 x +12V/+5V pass through output
介面
 USB 2.0 (480Mbps)
記憶卡電量需求
 USB供電
記憶卡支援
 XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*)
重量
 390 g

備註
  *Windows 98/me requires driver installation(downloadable from download section)
SilverStone相關產品推薦
CW03
Premium standard ATX HTPC chassis 更多...
SG03-F
Classic Micro-ATX small form factor chassis with dual front fans. 更多...
TJ09
Flagship-level extended ATX tower chassis 更多...
描述
版本
大小
下載
FP35 Manual
v1.0
2,111 KB
Driver for Windows 98/me
v1.0
2,625 KB


 
  • Q. How can I prevent my system from crashing or freezing when I try to hot-swap my hard drive?
    A: Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
    1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)

    2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.

    This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.
  • Q. Why can I not see the USB device icon in the system tray after I safely remove my media cards?
    A:
    1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



    2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.
  • Q. Why can I not see the USB device icon in the system tray after I safely remove my media cards?
    A:
    1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



    2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.


如有任何問題, 請洽服務與支援信箱 :support@silverstonetek.com。
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.