Accueil Support Boîtiers Sugo Series SG02-F
   
 
EXTERIOR PICTURES
 
 
 
 
INTRODUCTION
The SG02F, as the successor to the SG02 is an evolutionary step forward in both performance and the capabilities over the original Sugo chassis, the SG01. With the case now capable of handling even more powerful graphics cards than ever before, the SilverStone engineers were still able to keep the smaller dimension in tact. Although SG02F’s front panel design is unchanged from its predecessor, its styling and function continues to stand out from ordinary SFF designs. The same can also be said of its tried and true chassis layout, which is still capable of accepting larger ATX power supply or optical drives than other SFF cases available. Built based on a brand new steel structure, the SG02F is sure to please potential builders looking for primarily silent applications.

 
 
Caractéristiques
  • Steel structure for silent builds
  • Modern and cleanly styled SFF chassis
  • Enhanced cooling layout for high performance
  • Dual 5.25” and 3.5” drive bays
  • Micro ATX motherboard & ATX PSU compatible
  • Extended-length expansion cards support


FEATURE PHOTOS
 
 
REMARK


SG02-F outfitted with 14.5" long ATI Radeon HD 2900XTX 1GB GDDR4 (OEM version)

Graphic card length reference:
  1. AMD Radeon HD 5970 - 12.2"
  2. AMD Radeon HD 6990 - 12"
  3. AMD Radeon HD 6970 - 11"
  4. AMD Radeon HD 6950 - 11"
  5. AMD Radeon HD 5870 - 11"
  6. AMD Radeon HD 6870 - 10.5"
  7. NVIDIA GeForce GTX580 - 10.5"
  8. NVIDIA GeForce GTX480 - 10.5"
  9. AMD Radeon HD 5850 - 9.5"
  10. NVIDIA GeForce GTX470 - 9.5"
  11. AMD Radeon HD 6850 - 9"
If an expansion card is longer than 9.6” and it needs to be installed in the first slot, please refer to the manual for installation instructions.
 
 
Modèle N°
SST-SG02B-F (noir)
SST-SG02W-F (blanc)
SST-SG02B-F-USB3.0 (noir)
SST-SG02W-F-USB3.0 (blanc)
Matériau utilisé
Panneau frontal en ABS & acrilique, châssis en SECC
Carte mère
Micro-ATX
Multimédia
--
Baies
Externe 5.25” x 2
1 adapatateur 3.5"
Interne 3.5” x 2
Systeme de refroidissement
facade --
Arrière  1 emplacement pour ventilateur de,
Côté 1 ventilateur de 80mm en admission 2050 tr/min en option 80mm ou 70mm ayant un épaisseur de 25mm, 15mm ou 10mm
Dessus 1 emplacement pour ventilateur de 80mm
Le fond --
Interne --
Emplacement d’extension
4
Ports E/S en façade
USB 2.0 x 2 (SST-SG02B-F, SST-SG02W-F only)
USB 3.0 x 2 (SST-SG02B-F-USB3.0, SST-SG02W-F-USB3.0 only)
IEEE 1394 x 1
Audio x 1
MIC x 1
Alimentation
Standard PS2(ATX) en option
Operating system support
--
Carte graphique
Supporte les cartes grand format (36.8 cm), width restriction-4.46"
Limitation of CPU cooler
82mm
Limitation of PSU
With ODD combine length = 370mm with 20mm connector
Poids net
4.1 kg
Dimensions
270 mm (W) x 212 mm (H) x 393 mm (D), 22.5 liters
Supplémentaire
--

Remark
* CPU cooler cannot exceed 82mm in height

Recommended SilverStone products
NT06-PRO
CPU cooler designed for SFF. more information...
FX121
Add a cross flow fan for additional cooling.(Notice : You can only add one device from NT06-E or FX121. ) more information...
SUSCOOL81
Equip your SG02-F with Suscool 81 for the ultimate combination of quietness and performance. more information...
PP05
Combine PP05 with a compatible Strider series PSU for the ultimate SFF power source. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
Sugo Pack
Get a Sugo Pack to conveniently take your SG02-F anywhere you go. more information...
CP04
We recommend CP04 90° degree SATA cable for installing extension expansion card in SG02-F. more information...
Describe
Ver
Size
Téléchargement
SG02-F manual
v1.0
9,964 KB


 

  • Q. Front panel connectors installation guide.
    A:

    Power switch and reset switch installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



    LED connector installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
    White colored wires are negative while other colored wires are positive.
    Power LED connector is designed as separate pins for compatibility with different motherboard specifications.
  • Q. USB 3.0 Cable Upgrade Guide
    A:

    1. Loosen three screws located on the back of SG02-F and detach top-panel gently.
         

    2. Loosen five screws on the fan bracket (two on top, two on rear and one on the side) and detach it gently.
         

    3. Loosen four hard drive cage screws on the bottom of SG02-F.
         

    4. Loosen four screws behind the front panel and detach front panel gently.
         (There are one screw hidden behind hard drive cage, you need to move hard drive cage to the right first, then use screwdriver to loosen the hidden screw. )
         
         

    5. Loosen two screws near front I/O module and detach it gently.
         

    6. Install USB 3.0 front I/O module (part number: G11303590) and secure with two screws.
         Assemble parts back in reverse order carefully. Your case is now USB3 ready.
         


If the answers don't solve your problem, please email to support.eu@silverstonetek.de. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.