SilverStone Technology Co., Ltd.- TJ10

特色
規格
推荐产品
产品评测
文件下载
问与答

Quiet 120mm fan included for rear exhaust

Dual top panel 120mm fan mounts

All aluminum construction with classic front panel and door design

Die-cast aluminum support for extended cards

Slide-out motherboard tray for Extended-ATX/SSI-EEB motherboards

Dual hard drive compartment with 120mm fan slot in between

PSU slot for ATX/PS2 or redundant PSUs with security holder

Unique SilverStone designed see-through air intake vent with 120mm fan

Home theater component style foot stands

TJ10 Feature list

型号	SST-TJ10B (黑), SST-TJ10B-USB3.0 (黑)
	SST-TJ10S (银)
	SST-TJ10B-W(黑,透明侧窗), SST-TJ10B-W-USB3.0(黑,透明侧窗)
	SST-TJ10S-W(银,透明侧窗)
材质	前铝面板门组, 2.0mm 铝合金架构
主机板	SSI-EEB, Extended ATX, ATX, Micro-ATX
	--
多媒体	--
磁盘架	外露	5.25” x 4
		3.5” x 1
	隐蔵	3.5” x 6
散热系统	前	1 x 120mm 风扇孔
	后	1 x 120mm 风扇(出风), 1200rpm, 21dBA
	侧边	1 x 120mm中段风扇(进风), 1200rpm, 21dBA
	顶部	2 x 120mm 风扇孔
	底部	--
	内部	--
扩充糟	7
前置 I/O	USB 2.0 x 2 (SST-TJ10B, SST-TJ10S, SST-TJ10B-W, SST-TJ10S-W only) USB 3.0 x 2 (SST-TJ10B-USB3.0, SST-TJ10B-W-USB3.0 only) IEEE1394 x 1 audio x 1 MIC x 1
电源	1 x 标准 PS2(ATX)选配或1 x Redundant PS2
操作系统支持	--
显卡	选配 (可安装12寸显卡), width restriction-6.81"
處理器散熱器限高	169mm
電源供應器深度限制	Unlimited
净重	13 kg
尺寸	207 mm (宽) x 521 mm (高) x 644 mm (深), 69.5 公升
其它	TJ10 NVIDIA Edition
	--

备注

	To build your water cooling system, we recommend equip your TJ10 with RADSUPPORT09 to install a 120x2 radiator in TJ10.

SilverStone相关产品推荐

NT06-E

Equip your TJ10 with NT06-E for the ultimate combination of quietness and performance. 更多...

FN121-BL

Equip your TJ10 with FN121-BL for added lighting effect in available 120mm fan slots. 更多...

Suscool121

Equip your TJ10 with Suscool121 for the ultimate combination of quietness performance. 更多...

FP35

Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. 更多...

SDP08

Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 更多...

描述版本大小下载 TJ10 manual v1.0 4,442 KB

Q. How to replace the central fan of TJ10 ?

A: Please download the "TJ10 central fan replace guide" for reference.

Q. Front panel connectors installation guide.

A:

Power switch and reset switch installation guide：
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide：
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

Q. USB 3.0线材安装步骤

A:
1. 将TJ10后方三颗螺丝拆除后，将左侧板小心卸除.


2. 使用内六角板手将固定front I/O模块的四颗螺丝卸除，然后将模块小心卸离上盖.


   早期版本的TJ10，请由机壳内侧将固定front I/O模块的四颗螺丝卸除，然后将模块小心卸离。


3. 将front I/O模块后方的两颗螺丝卸除.


4. 将front I/O模块左右两边共两颗螺丝卸除.


5. 卸除固定USB模块的四颗螺丝，然后将旧模块小心地卸除.


6. 安装新的USB 3.0 模块（零件料号: G11303500），并将四颗固定螺丝小心地锁上.


7. 安装新的front I/O铝上盖（零件料号: 银色: G10106112 / 黑色: G10106122），然后将左右共两颗螺丝小心地锁上。
     再依相反的步骤，将机壳小心地装回. 您的机壳现在已经升级至USB 3.0.

1. 将TJ09后方三颗螺丝拆除后，将左侧板小心卸除.


2. 使用内六角板手将固定front I/O模块的四颗螺丝卸除，然后将模块小心卸离上盖.


   早期版本的TJ09，请由机壳内侧将固定front I/O模块的四颗螺丝卸除，然后将模块小心卸离。


3. 将front I/O模块后方的两颗螺丝卸除.


4. 将front I/O模块左右两边共两颗螺丝卸除.


5. 卸除固定USB模块的四颗螺丝，然后将旧模块小心地卸除.


6. 安装新的USB 3.0 模块（零件料号: G11303500），并将四颗固定螺丝小心地锁上.


7. 安装新的front I/O铝上盖（零件料号: 银色: G10106112 / 黑色: G10106122），然后将左右共两颗螺丝小心地锁上。再依相反的步骤，将机壳小心地装回.
     您的机壳现在已经升级至USB 3.0.

如还有任何问题, 请洽服务与支持邮箱 :support@silverstonetek.com.cn。